How to choose a right quality printing mesh? - Industrial News - Stainless Steel Wire Mesh_Stainless Steel Wire Cloth_Stainless Steel Filter Mesh_Ss wire mesh-MAISHI MFG. 

Stainless Steel Wire Mesh_Stainless Steel Wire Cloth_Stainless Steel Filter Mesh_Ss wire mesh-MAISHI MFG.

Hotline

How to choose a right quality printing mesh?

The quality testing of printing mesh is a complicated process, not easy to tell it in a short article.

So we extract several basic and easy ways of checking mesh quality

 

Check the hole shape:

Good quality printing mesh should have the square hole, to insure the printing quality. But for low quality, the hole shape will be irregular.(as shown in below email)

In general, we check the hole shape with 40x or 100x microscope.

For our old customers, we could send you a microscope for free, as long as our cooperation amount is more than USD10,000.00.

 

Check the mesh count:

Right mesh count is the basic requirement for printing mesh, affecting the printing quality directly. Our testing tool for mesh count checking is the "mesh count ruler"(or called "mesh count tester").

 

Same as above, we could send our old customer a mesh count tester for free, as long as our cooperation amount is more than USD10,000.00.

In the following days, we'll push more practical printing mesh information to you.

 

If you have any questions, you're welcome to contact us in any time.

MAISHI, your best partner of wire mesh.

Main products : Stainless Steel Wire Cloth, Stainless Steel Wire Mesh, Stainless Steel Wire Screen, Stainless Steel Filter Mesh, Ss wire mesh, 304 wire mesh, 316 wire mesh , wire cloth and so on.

PREVIOUS: Advantages and disadvantages of stamping and transfer printing
NEXT:How to choose suitable mesh count for garments screen printing?
 

X

Online Chat

  Email me