Industrial News

What you should know about stainless steel wire mesh(2)

What you should know about stainless steel wire mesh(2)

Square hole stainless steel wire mesh weaving process selection

The hole type is a square hole stainless steel wire mesh. From the knitting theory, the ratio of the hole to the wire should not be less than 1, and the ratio of the wire to wire is less than 1, it is difficult to weave, and the minimum limit is 0.7. Generally, when a square-hole stainless steel wire mesh is woven, a high-mesh stainless steel wire mesh having a ratio of a hole to a wire of 1-1.5 is often used for twill weaving. However, when the ratio of the filaments is greater than 1.35, twill weave can be used. When the ratio of the filaments is greater than 1.5, plain weave should be used, because if twill weave is used, the warp and weft are easily interlaced and the web is inclined. When the ratio of the aperture to the wire is less than 1.35, the twill weave should be adopted. If the plain weave is used, a large number of broken diameters are easily generated, which greatly increases the difficulty of the knitting process. The larger the square hole stainless steel wire mesh ratio, the smaller the bending angle and the wrap angle of the wire mesh. When the thickness of the stainless steel screen is equal to 2 times the wire diameter, this means that the warp and weft in the stainless steel wire mesh are equally curved.

Square hole stainless steel wire mesh thickness

Generally, the square hole stainless steel mesh screen which is actually woven has a mesh thickness generally larger than 2 times the wire diameter, and the warp bending deformation is larger than the weft wire bending deformation, that is, the warp angle is larger than the weft angle. Because the stainless steel screen is actually woven, the length (ie, the reduction ratio) of the warp bending deformation can be compensated by increasing the diameter of the weaving machine, and the length of the weft bending deformation can only depend on the weft itself. Plastic elongation to compensate. Therefore, the actual woven stainless steel mesh square hole mesh usually has a corner angle larger than the weft angle. Under normal circumstances, the mesh thickness is 2.2d-2.5d (d is the wire diameter).

The stainless steel wire mesh produced by our company meets the export regulations and can be customized according to the special needs of customers. Under the premise of ensuring the quality, we can also provide the best packaging and the best service, you no longer need to Worried about product damage caused by packaging, do not worry about the loss caused by the irresponsibility of the manufacturer.

Our company has always pursued the business philosophy of not deceiving customers, and we believe that our services and products can bring you the best quality experience and meet your needs for products.


PREVIOUS: What you should know about stainless steel wire mesh(1)


NEXT:Stainless steel filter mesh product supply

Our one and only priority is the customer satisfaction

Get a quote