Stainless steel filter is used in the floor heating pre-filter
Common standards for stainless steel filters:
Material: 304 stainless steel
Structure: double layer (porous plate plus stainless steel filter)
Common mesh: 30 mesh, 40 mesh, 60 mesh, 80 mesh, 100 mesh (different from filtering particles of different sizes)
Working principle: The ground heating pre-filter device is oriented at the water inlet of the inlet pipe diverter. Effect: The stainless steel filter inside the floor heating pre-filter can filter the particulate impurities in the warm water and prevent the line heating pipe from blocking. Because of the scale mud, the Y-type copper filter needs to be cleaned once a month, and it is easy to form the floor heating and not hot.
Cleaning method for floor heating pre-filter filter:
The first step: remove the Y-type filter valve and take out the filter;
The second step: control the solid impurities in the filter, wash the filter through the tap water flow, and brush with a discarded toothbrush;
Step 3: Check if there is still a blocked place in the filter network port, and make sure that the flushing is clean and then reinstalled on the Y-type filter angle valve.
Generally, the stainless steel filter device is in the floor heating descaling filter, and the device orientation is at the water inlet of the inlet pipe diverter. Effect: Filter the particulate impurities in the warm water to prevent the line heating pipe from being blocked; according to the scale formation, avoid the uneven heating caused by the scale. Together, let users stay away from the trouble of geothermal cleaning.