Warping is a word that people may not understand. What does it mean? It is to weave a certain number of roots and warp yarns in a grid to weave into a piece of silk. This makes it possible to make the warp tension relatively uniform. This is a preparation for the web.
What are the requirements for a specific warping process? Experienced manufacturer maishi tells the following
1. The warp beam density on the warp beam should be kept uniform, the surface should be cylindrical, and the warp beam full width has no soft and hard unevenness or unevenness.
2. When warping, the warp tension should be appropriate. If it is too large, the warp will produce unexpected elongation, which will damage the mechanical properties of the warp yarn, and increase the warp yarn breakage during the weaving process. If it is too small, the warp beam will be easily trapped during the weaving process. This causes the defects such as the pressure line, which seriously affects the quality of the product and even makes the weaving impossible.
3. During the warping process, the tension of the whole warp yarn should be uniform and
kept as constant as possible. Otherwise it will increase the warp breakage and affect the quality of the Stainless steel wire mesh.
4. The length of each warp yarn on the warp beam must be consistent and meet the requirements of the contract task to prevent multiple turns and fewer circles.
5. The total number of warp yarns should meet the requirements of process calculation t
o ensure the width of the screen and reduce the waste of the wire.
6. The width of the warp yarn on the warp beam shall be consistent with the width of the web; the position of the warp yarn on the warp beam must correspond to the position of the steel shovel of the loom and shall not be skewed.
Every process of warping is important, which is a very important step in weaving a net. If the warping is not good, it will affect the quality of the final product.
More popular articles
PREVIOUS： Is the 304 stainless steel filter mesh made magical?
NEXT：What are the characteristics of stainless steel wire mesh?
