The best printing time after stretching - Industrial News - Stainless Steel Wire Cloth_Stainless Steel Wire Mesh_Stainless Steel Filter Mesh_Ss wire mesh-MAISHI MANUFACTURE(GROUP) LIMITED. 

Stainless Steel Wire Cloth_Stainless Steel Wire Mesh_Stainless Steel Filter Mesh_Ss wire mesh-MAISHI MANUFACTURE(GROUP) LIMITED.

Hotline

The best printing time after stretching

Polyester is a kind of elastic material. Silk screen printing mesh is woven by polyester wire, So if the tension is too large, the screen printing mesh are easy to lose elasticity and fracture. But if the tension is too small, the mesh will be not tight.
 

The tension weaken quickly after 20 minutes’ stretching, so we need to finish fixing the mesh when stretch is done.

Normally, most mesh tension is not stable after short timestretching. It will decline sharply within 24 hours and continue to decline within follwing 2-3 days.

You shouldn't need a ton of pressure but it is a good idea to have a halfway decent ton. Make sure to follow the directions for your specific stencil remover.

If the screen printing mesh is used to print high precision image and time is enough, we had better print in 24 hours.

Main products : Stainless Steel Wire Cloth, Stainless Steel Wire Mesh, Stainless Steel Wire Screen, Stainless Steel Filter Mesh, Ss wire mesh, 304 wire mesh, 316 wire mesh , wire cloth and so on.

PREVIOUS: Some factors affecting clothes printing
NEXT:Polyester screen printing mesh Aperture and opening area
 

X

Online Chat

  Email me