Regular manufacturers produce stainless steel wire mesh through strict procedures. Many customers who want to buy stainless steel wire mesh need to do some simple basic investigations. Such as production processes, certification and the like. In order for us to better buy good quality products.
There is a warping process in the stainless steel wire mesh production process. The task of warping is to take a certain number of warp yarns of a certain length from the filaments to form a filament sheet, so that the warp yarns have a uniform tension and are tightly wound in parallel with each other on the roller. Weaving the net is ready.
The specific warping requirements and operation steps are as follows:
1. During the warping process, the tension of the whole warp yarn should be uniform and kept as constant as possible. Otherwise it will increase the warp breakage and affect the quality of the woven mesh.
2. When warping, the warp tension should be appropriate. If it is too large, the warp will produce unexpected elongation, which will damage the mechanical properties of the warp yarn, and increase the warp yarn breakage during the weaving process. If it is too small, the warp beam will be easily trapped during the weaving process. This causes the defects such as the pressure line, which seriously affects the quality of the product and even makes the weaving impossible.
3. The warp beam density on the warp beam should be kept uniform, the surface should be cylindrical, and the warp beam full width has no soft and hard unevenness or unevenness.
4. The total number of warp yarns should meet the requirements of process calcul
ation to ensure the width of the screen and reduce the waste of the wire.
5. The length of each warp yarn on the warp beam must be consistent and meet the requirements of the contract task to prevent multiple turns and fewer circles.
6. The warp and web on the warp beam should look the same; the position of the warp yarn on the warp beam must correspond to the position of the loom of the loom and cannot be skewed.
Stainless steel mesh friends need to be serviced after a period of use to extend their service life. Maishi is a regular wire mesh manufacturer with high professional skills and more than 30 years of experience. Master maishi told us to use a mild detergent or a towel to wipe the warm water.
More popular articles
- What is the range of stainless steel filter meshs that can be used?
- Stainless steel wire mesh products are very common in life
PREVIOUS： What are the reasons for the popularity of stainless steel filter meshs?
