Industrial News

Choose your mesh count

12/12/2017

Different mesh count may suitable for different textiles, with the right knowledge you can make informed mesh decisions that will make for sharper prints, reduced ink costs, and an overall better printing experience

The reason of "yellow mesh is better than white mesh"

12/12/2017

In the process of exposure, the machine is using the ultraviolet light to solidify emulsion While the white color mesh will reflect or diffuse reflect the ultraviolet lights to the border of the emulsion, where shouldn’t be solidified

Choose the different mesh according to the ink

12/11/2017

①Normally the water-based ink is suitable for more thicker wire mesh, 125-180mesh inch (1inch=1000mil=2 54cm=25 4mm)

The problem we should pay attention on how to choose mesh count?

12/11/2017

First Please consider the complexity of ink transit, middle tone should use the transparent inks The pigmental particle is imperceptible and the rate of relative pigments chromatophore is higher

What “S” and “T” Stand for in Screen Printing Mesh

12/11/2017

There are two kind of mesh type according to wire diameter Please check details as below:

How to Measure Wire Cloth.

12/11/2017

Mesh count can be shown as either a whole number, fraction, or as two numbers unless the material is a specialty cloth called space cloth - each item is described below:

The best printing time after stretching

12/11/2017

Polyester is a kind of elastic material Silk screen printing mesh is woven by polyester wire, So if the tension is too large, the screen printing mesh are easy to lose elasticity and fracture But if the tension is too small, the mesh will be not tight

The Distinguish Method for Nylon and Polyester

12/11/2017

Polyester: Easy to ignite, close to the flame that is melting, burning with black smoke, yellow flame, emitting an aromatic odor, burned ashes to dark brown lumps, broken easily with your fingers

407Num Previous 1.. 47 48 49 50 51 Next