Stainless steel wire mesh has been widely used, but there is a lot of knowledge you don't know, such as its thickness, what is its purpose? Let's take a closer look.
Stainless steel mesh mesh diameter: 5 mm to 600 mm. Type: single layer, multiple layers; according to the shape is divided into round, rectangular, waist, oval, etc.
Stainless steel wire mesh use: used in rubber, plastic industry, grain and oil screening.
Thickness of stainless steel mesh: The thickness of the wire mesh refers to the distance between the surface of the wire mesh and the bottom surface, which is generally measured in millimeters (mm) or micrometers (um). The thickness should be the measured value of the screen when it is left in tension. The thickness is
determined by the diameter of the screen mesh, and the amount of ink passing through the screen is related to the thickness.
Screen width, aperture, and mesh size are all important references for stainless steel wire mesh opening. The opening of the screen is very important for the printing of characters, etc. during the printing p
rocess. The degree of opening actually represents the width of the mesh, expressed as the square root of the area of the mesh surrounded by the warp and weft of the net (usually in microns, 1 micron = 1 ∕ 1000 mm). Therefore, the longer the length of one side of the mesh, the larger the opening degree, but the same opening degree, the printing effect is also good or bad due to the difference in the material and the operation method of the woven mesh.
PREVIOUS： Stainless steel filter mesh manufacturer
