The wire mesh processing of stainless steel wire mesh is generally done in two ways: wrap and burrs. The width direction of the stainless steel mesh. It is the two ends of the stainless steel wire mesh, and the processing method of the edge is different. Usually divided into wraps and burrs. The so-called wrap means that the two warp yarns adjacent to the two ends of the screen are connected. The two warp threads on the burrs are not connected.
The two different ways of stainless steel wire mesh are the most different. The mesh of the wrapped edge is not easy to fall off, the structure is firm, the safety performance is high, and it is not easy to handle. The stainless steel 
mesh wire of the raw edge is easy to fall off, and is generally used for mechanical work protection, and it is easy to puncture the hand in the handling project. The raw stainless steel mesh has a short processing time and a relatively low cost, while the stainless steel mesh with a hemming has a relatively long processing time and a high processing cost.
Stainless steel wire mesh processing is the above two forms, we can communicate with the manufacturer when we buy. The maishi professional salesman will recommend whether you are a stainless steel wire mesh according to your situation. Help you choose a more desirable mesh.
More popular articles
- What is the standard for Stainless steel wire mesh?
- Are there many types of stainless steel wire mesh?
PREVIOUS： Are there many types of stainless steel wire mesh?
NEXT：How to carry out the maintenance of stainless steel wire mesh
