Stainless steel wire mesh transitions can be divided into three types: actual filtration degree and nominal filtration degree. Nominal filtration degree (also called nominal pore diameter): refers to the cross section of the woven circular stainless steel dense mesh, the inscribed circle diameter of the triangular hole composed of warp and weft.
The inscribed circle diameter of the inclined surface of the adjacent two weft wires and the warp wire forming the trian
gular hole. Actual filtration degree: refers to the degree of filtration of the dense mesh under actual use conditions. For a specific size of the dense stainless steel filter, the actual filtration degree of the same size of the dense stainless steel screen changes accordingly when the conditions of use change.
The actual filtration degree of the dense mesh is directly affected by the use conditions such as temperature, differential pressure, length of use, viscosity of the medium, and bending times of the filter holes. Therefore, the actual filtration degree is a variable value. ,
The above is an introduction to the fact that the filtration degree of the stainless steel wire mesh filter is not fixed. I hope to be helpful to you.
More popular articles
- Direct sales of manufacturers of stainless steel wire mesh
-
What is the necessity of stainless steel wire mesh passivation?
PREVIOUS： Is it true that the stainless steel wire mesh material is verified with a magnet?
